Federal Fluid Power Products

Flow Dividers & Proportionators

Federal Fluid Power is the leading distributor of Flow Dividers and Proportionators from such manufacturers as Prince Manufacturing, Delta Power, White Hydraulics...and more.

Quick Contact

Name

Company

Phone

Email

Federal Fluid Power is a full service hydraulic component distributor offering application engineering services and design assistance. With more than 35 product lines represented by over 30 different manufacturers, Federal Fluid Power has components in stock to get you up and running and keep you moving.

Fill the above form for a fast response.

Products > Flow Dividers & Proportionators

Delta Power Company
Delta Cast Iron Gear Flow Divider Proportionator
Delta Cast Iron Gear Flow Divider Proportionator
  • Split flow evenly up to 8 ways
  • Flows up to 100 gpm
  • Flows as low as 0.5 gpm
  • Up to 5000psi intermittent
  • Integrated relief valves on some units
  • Made in USA
Download Info Sheet [1.128MB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
Prince Hydraulics
Prince Spool Proportional Flow Divider
Prince Spool Proportional Flow Divider
  • Splits one flow two ways
  • Various ratios (50:50, 80:20, etc)
  • 30 gpm max inlet flow capacity
  • 3000 psi max operating pressure
  • Optional return checks for free reverse flow
  • More economical than gear style
Download Info Sheet [260KB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
White Hydraulics
Proportional Control Valves
White Drive Products Hydraulic Flow Divider
White Hydraulics flow dividers represent an ingenious use of the patented Roller Stator® gerotor assembly. These highly effective devices use a common housing to supply the input flow to two gerotor assemblies linked by a common drive link. By linking the two gerotor assemblies together, accurate splitting of the flow is assured. These flow dividers use no bearings or rotating seals, eliminating the typical failures in other designs. By using the highly efficient Roller Stator® gerotor elements, high efficiencies are maintained, even at low flows. Because White Hydraulics flow dividers work at much lower RPMs than most gear dividers, they are noticeably quieter. These flow dividers are an excellent way to synchronize cylinders or motors. Because they tolerate higher output pressure differentials than other designs, they may also be used for pressure intensification by connecting one output to tank.
Download Info Sheet [61KB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page