Federal Fluid Power Products

Hydraulic Pumps

Federal Fluid Power is the leading distributor of Pumps from such manufacturers as Prince Manufacturing, Brevini SAM Hydraulik, White Drive Products, Poclain Hydraulics, Dynex, Delta Power, BVA, Brand, Marzocchi, Metaris ...and more.

Quick Contact

Name

Company

Phone

Email

Federal Fluid Power is a full service hydraulic component distributor offering application engineering services and design assistance. With more than 35 product lines represented by over 30 different manufacturers, Federal Fluid Power has components in stock to get you up and running and keep you moving.

Fill the above form for a fast response.

Products > Hydraulic Pumps

Prince Manufacturing Corporation
Prince Manufacturing Corporation
Prince SP20 Gear Pump:
  • Patented Non-Symmetrical Gears
  • PTFE composite bearings
  • One piece hardened alloy steel gears and driveshaft
  • Pressures up to 3000 psi
  • SAE "A" 2 bolt mounting
  • 5 drive shaft configurations available
  • .400 to 2.014 ci displacement
Download Info Sheet [410KB .pdf]
Visit our outlet store
Prince Manufacturing Corporation
Prince SP25 Gear Pump:
  • Patented Non-Symmetrical Gears
  • PTFE composite bearings
  • One piece hardened alloy steel gears and driveshaft
  • Pressures up to 3000 psi
  • SAE "B" 2 bolt mounting
  • 1.141 to 3.869 ci displacement
Download Info Sheet [430KB .pdf]
Visit our outlet store
Prince Manufacturing Corporation
Prince Manufacturing Hydraulic PTO Gear Pump:
  • Standard duty cycle - Aluminum housing (Reduced weight)
  • High duty cycle - Cast Iron housing (Better at higher temperatures)
  • Internally splined 1 3/8" diameter drive shaft, 6 tooth or 21 tooth
  • Up to 40 gallons a minute @ 1000 rpm (21 tooth)
  • Up to 22 gallons a minute @ 540 rpm (6 tooth)
  • 2250 PSI Max operating pressure
  • Slips onto tractor PTO shaft (no gear box required)
Download Info Sheet [220KB .pdf]
Visit our outlet store
Prince Manufacturing Corporation
Prince Double Gear Pump:
The SPD1 and SPD3 series of double pumps consists of two SP20B or SP25B pump sections respectively. The typical performance of each section and the features of the pump are the same as indicated for the SP series of Prince pumps.
Download Info Sheet [588KB .pdf]
Visit our outlet store
Prince Manufacturing Corporation
Prince SP20P Priority Gear Pump:
  • Patented Non-Symmetrical Gears
  • PTFE composite bearings
  • One piece hardened alloy steel gears and driveshaft
  • Pressures up to 3000 psi
  • SAE "A" 2 bolt mounting
  • 5 drive shaft configurations available
  • .400 to 2.014 ci displacement
  • Integral relief on priority flow
  • Priority flows from 1.5 to 5 gpm
  • Ideal for steering circuits
Download Info Sheet [211KB .pdf]
Visit our outlet store
Prince Manufacturing Corporation
Prince SP25P Priority Gear Pump:
  • Patented Non-Symmetrical Gears
  • PTFE composite bearings
  • One piece hardened alloy steel gears and driveshaft
  • Pressures up to 3000 psi
  • 1.141 to 3.869 ci displacement
  • Integral relief on priority flow
  • Priority flows from 1.5 to 5 gpm
  • Ideal for steering circuits
  • SAE "B" 2 bolt mounting
Download Info Sheet [216KB .pdf]
Visit our outlet store
Prince Manufacturing Corporation
Prince SPD2 Gear Pump:
  • Patented Non-Symmetrical Gears
  • PTFE composite bearings
  • One piece hardened alloy steel gears and driveshaft
  • Pressures up to 3000 psi
  • SAE "A" 2 bolt mounting
  • 1.141 to 3.869 ci displacement
  • SAE "A" auxiliary mount - 9 tooth SAE "A" shaft
  • SAE "B" 2 bolt front mounting
Download Info Sheet [241KB .pdf]
Visit our outlet store
Prince Manufacturing Corporation
Prince Manufacturing Hand Pump:
  • Offers definite advantages over similar components of higher cost.
  • Has unique design features which insure versatility.
  • Handle can be used in (2) positions.
  • Can be mounted vertically and horizontally.
  • There are (3) different volume and pressure settings.
    • Position 1: 1.25 cu. in. per stroke-1500 psi*
    • Position 2: .95 cu. in. per stroke-2000 psi*
    • Position 3: .60 cu. in. per stroke-3000 psi*
    • *At applied force of 60-65 Ibs. on handle. (Pressure to 6,000 psi can be developed with more force)
  • Available is 1 gallon or 1/2 gallon reservoir sizes
Download Info Sheet [342KB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
Sam Hydraulik
SAM Open Circuit Piston Pump
SAM Open Circuit Piston Pump
SH5V 50 pump series are designed for operation in open circuit. The axial piston swash plate design is for mobile and industrial applications. The pump features patented piston shoes resulting in minimal leaks and high volumetric efficiency. Controls options are designed to provide high accuracy and repeatability of operation. SH5V pump operates at a level of quietness that meets the requirements of today's demanding industrial conditions.
Download Info Sheet [1MB .pdf]
Visit our outlet store
SAM Medium Duty Closed Circuit Piston Pump
SAM Medium Duty Closed Circuit Piston Pump
MD10V series is a family of variable displacement axial piston pumps for use in closed circuits. The displacement is infinitely variable by means of a tilting swash plate; the oil flow can be reversed over the neutral point. Various controls are available: manual, servo control lever operated, on/off electric, electro proportional, hydraulic pilot, and the new automotive control. All pumps have maximum pressure relief valves and can be supplied single or tandem version. Different through drive options are available for auxiliary pump mounting as well as a wide range of options: bypass valve, pressure filter and others.
  • from 14 to 64 cm /rev[from 0.8 to 3.9 in³/rev]
  • Flow range: From 50 to 230 l/min [from 13.2 to 60.7 U.S. gpm]
  • Input speed: Max: up to 3600 rpm Min: 700 rpm
  • Pressure range: From 250 to 350 bar (Max) [from 3625 to 5075 psi (Max)]
Download Info Sheet [2.65MB .pdf]
Visit our outlet store
SAM Heavy Duty Closed Circuit Piston Pump
SAM Heavy Duty Closed Circuit Piston Pump
SH6V series are variable displacement, axial piston pumps, with swash plate design, for closed circuit hydrostatic transmissions and high pressure applications. SH6V pumps series are available with several control devices including manual lever, hydraulic proportional, electric proportional, and electric on/off. The pump can be supplied as single or tandem version and with through drive options for the assembly of auxiliary gear pumps.
  • Displacement: 75/55, 130/100 cm3/rev [4.57/3.35, 7.93/6.1 in3/rev]
  • Flow range: From 220 to 365 l/min [from 58 to 96 U.S. gpm]
  • Input speed: Max.: up to 4300 rpm Min.: 500 rpm
  • Pressure range: From 400 to 480 bar (Max) [from 5800 to 6960 psi (Max)]
Download Info Sheet [1.57MB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
White Piston Pump
Light Duty Closed Closed Ciruit Hydrostatic Pump
  • Ideally suited for the lawn and garden, and light duty construction markets.
  • Suited for under 50 hp
  • Continuous minimum and maximum speeds of 600 and 3,600 rpm, respectively.
  • Incorporates White Drive Products' Shock Reduction Technology (SRT).
  • Displacements range from .62-1.10 (10-18CC)
  • Max continuous pressure 1425psi (98 bar)
  • Available as a tandem
  • SAE "A" mount
Download Info Sheet [1.26MB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
Poclain Hydraulics
Poclain Piston pumps closed circuit
Poclain Piston pumps closed circuit
Poclain offers a proven pump technology; all models utilize the parallel axial piston/slipper concept for closed loop circuits:
  • Variable Displacement - 6 sizes of pump from 55cc/rev to 250cc/rev,
  • High design flexibility:
    • 14 output shafts
    • 8 integral charge pump options from 11 to 65 cc/rev
    • Choice of filtration
    • 2 connection locations to suit your machine
    • A range of auxiliary mounting pads
  • Tandem mounting available
  • Low noise level
  • High torque for through drive
  • Overpressure protection
  • Rugged, compact, and modular
  • Specially designed electrical control for use with SMART Drive
Download Info Sheet [619KB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
Hystar
Hyster
Hystar Open Circuit Piston Pump :
Hystar open circuit variable volume piston pumps are available with an adjustable pressure compensator and a maximum flow volume control:
  • Economical low cost import
  • Seven displacement sizes: 0.5,1.01,1.34,2.14,2.76,4.27,6.1 cu in
  • 3000psi max
Download Info Sheet [328KB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
Dynex High Pressure Hydraulics
Dynex Piston Pump
Dynex High Pressure Piston Pump :
Individual piston check valves direct flow from the inlet side of the pump to the outlet port in these high pressure hydraulic pumps. The positive-seating checkball valves provide better wear and high volumetric efficiency, especially at high pressure.
  • Pressures to 20 000 psi (1380 bar).
  • Flows from 0.22 to 60 U.S. gpm (0,83 to 227 L/min) at 1800 rpm.
  • Optional remote control proportional to an electrical input signal.
  • The checkball pump design is ideal for hydraulic systems with demanding conditions including:
    • pressure spikes
    • contamination
    • dirty environments
    • special fluids like Skydrol
    • extreme temperatures
    • long duty cycles
    • offshore oil industry
Download Info Sheet [3.82MB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
Delta Power Company
Delta Power Company
Delta Cast Iron Gear Pump :
  • Keyed shaft or tang drive input
  • 4F17 and SAE "A" mounting
  • Displacements from .065 to 4.44 cu in/rev
  • Up to 2500psi int max pressure
  • Bi-directional
  • Log Splitter pumps (Hi/Low) 2 stage unloading
Download Info Sheet [6.9MB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
BVA
BVA Air Pump
BVA Air Pumps :
  • High strength reinforced aluminum alloy reservoir is lightweight and corrosion resistant
  • Pressure relief valve for overload protection
  • Suggested air pressure range: 90 - 175 psi / 6 - 12 bar
  • Designed to be used with single acting cylinders
  • Dust cover protection for the release control valve
  • Dual stage release control valve
  • Maximum working pressure: 10,000 psi / 700 bar
Download Info Sheet [2.08MB .pdf]
Visit our outlet store
BVA Hand Pump
BVA Hand Pumps :
  • P350, P1000 and P2001 feature 2 speed operation
  • Pressure relief valve for overload protection
  • Load release valve for single acting cylinder usage
  • Large oil capacities to power a wide range of cylinders and tools
  • Maximum working pressure: 10,000 psi / 700 bar
Download Info Sheet [1.38MB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
Brand Hydraulics
Brand Hand Pump
Hand Pump :
  • Relief that can be adjusted manually outlet
  • Check seat for zero leakage
  • Low cost
  • Three sizes:
    • single-acting piston (pumps on handle pull only) 0.20 in3 per full cycle. 6000 psi (4000 psi std relief setting).
    • double-acting piston (pumps on handle both directions) 0.60 in3 per full cycle. 3000 psi
    • large double-acting piston (pumps on handle both directions) 1.20 in3 per full cycle. 2000 psi
  • Tank options:
    • 95 - 95 in3 (12 in. height and 1/4" NPT filler plug)
    • 80 - 80 in3 (10 in. height and 1/4" NPT filler plug)
    • 65 - 65 in3 (8 in. height and 1/4" NPT filler plug)
    • 50 - 50 in3 (6 in. height and 1/4" NPT filler plug)
    • TL - 2 in. tank used in conjunction with customer’s external reservoir (1/4" NPT filler port).
Download Info Sheet [441KB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
Marzocchi Hydraulics
Marzocchi Gear Pump
Marzocchi Gear Pump
  • High performance aluminum micro-pumps.
  • Displacement from 0.19 up to 200 cc/rev.
  • Up to 7000 rpm
  • Up to 3500 psi max
  • European mounts & SAE "AA"
Download Info Sheet [1.64MB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page
Metaris
Metaris Piston Open Loop
Metaris Piston Open Loop
Metaris MA10V0(VS0) are a premium medium duty range of open loop piston pumps interchangeable with Rexroth* and other manufactures.
We also have a growing range of piston components for many popular brands including: Caterpillar*, Komatsu*, Sundstrand*, Rexroth* and Vickers*.
Download Info Sheet [1.52MB .pdf]
Visit our outlet store
Back to the top of this page -OR- Back to main products page