RYCO Hydraulics’ simple belief of “Higher Technology Equals Greater Performance” applies throughout the organization. RYCO Hydraulics has established a commitment to quality, extensive research and product development, placing RYCO Hydraulics at the forefront of the hydraulic hose and fittings industry
RYCO Hose Couplings are offered in One Piece crimp, Two Piece crimp, Push On, Field Attachable, Stainless Steel (Bitelok), and Mine Safe (Crocbite)
RYCO Hose offerings in One Wire, Two Wire, Multi Spiral, ISOBARIC, Teflon, Suction & Return, Pressure Washer and Thermoplastic Hose. RYCO offers Five Different Cover Types Avenger, Diehard, Slider, Survivor, Icebreaker with specifications found in the chart below:
RYCO Hose:
Recommended for:
Meets or Exceeds
T1A, T1D, RQP1
High temperature, medium to high pressure hydraulic oil lines; some phosphate ester fluids. Very high abrasion resistant cover.
SAE 100R1AT, AS 3791 100R1AT, DIN 20022-1SN, EN 853 Type 1SN, ISO 1436-R1AT & 1SN
T5, RQP5
Medium to high pressure hydraulic oil lines. Also suitable for fuel lines, airbrake lines, etc.
SAE 100R5, SAE J1402 Type AII (Up to -12), AS 3791 100R5
DF2A, DF2D
High pressure hydraulic oil lines, two wire hose with one wire dimensions and higher flexibility.
SAE 100R2AT, SAE 100R16, AS 3791, 100R2AT, EN 857 Type 2SC ISO 1436
T2A, T2D, T2S, T2C, RQP2
High pressure hydraulic oil lines. Extremely abrasion resistant exterior protection layer. Some phosphate ester fluids.
SAE 100R2AT, AS 3791 100R2AT, DIN 20022-2SN, EN 853 Type 2SN, ISO 1436-R2AT & 2SN
H12A, H12D, H12S
Very high pressure hydraulic oil lines. Extremely abrasion resistant exterior protection layer.
SAE 100R12, AS 3791 100R12, EN 856 Type R12, EN 856 Type 4SP (-12 to -32), ISO 3862 Type R12
SAE 100R13. AS 3791 100R13, EN 856 Type R13, ISO 3862 Type R13
H15A, H15D
Extremely high pressure hydraulic oil lines. Very high abrasion resistant cover.
SAE 100R15, ISO 3862 Type R15 (Except -32 size)
HSHA
Extra high pressure hydraulic oil lines
EN 856 Type 4SH, ISO 3862 Type 4SH
Gates
Whether you need to convey materials or move equipment, Gates industrial hoses and hydraulics will give you the application coverage you need for your job.
Federal Fluid Power stocks 3000psi hoses which exceeds SAE100R1 and SAE100R2 and 6000psi hoses which exceeds SAE100R12, SAE100R13, and SAE100R15 for assemblies ‘while you wait’ to production quantities for OEM service.
Federal Fluid Power has the capability to make hose assemblies as large as 2" including 6 spiral-wire hose
Adapters & Fittings
37 Degree Flare Fittings JIC
Swivel
SAE and NPT
Hose Fittings
Patented "Oring Seal" tube fittings
Stucchi Quick Disconnects and Check Valves
ISO 16028, ISO A, & ISO B compatible
Flat Face - Dry Break
Up to 10,000 psi
Connect under pressure
NPT & SAE check valves up to 290 psi crack - Up to 2" body
Multi Coupling Plates - connect multiple lines with single handle
